Cudy WR1200 User Manual

4
If your internet connection is through an ethernet cable directly from the wall instead of
through a DSL/Cable/Satellite modem, connect the ethernet cable to the router’s Port
#1, and skip steps 1, 2 ,3.
Method One: Using WPS Button
1. Turn off the modem and remove the battery if it has one.
2. Connect routers WAN Port to DSL/Cable Modem/Ethernet.
3. Turn on the modem and then wait about 2 minutes for it to restart.
4. Connect power adapter to the router.
5. Verify following LEDs to confirm the hardware is connected correctly
6. Connect your computer to the router (Wired or Wireless)
Wired
Turn off the Wi-Fi on your computer and connect it to routers LAN port via an ethernet
cable.
Internet
Modem
Power Socket
Power
WiFi
Internet
WAN
LAN1
LAN2
LAN3
LAN4

Cudy WR1200 Specifications

General

Max Wi-Fi Speed	1200Mbps
Power Supply	DC 12V/1A
Frequency Bands	2.4 GHz, 5 GHz
Antennas	4 x external antennas
Security	WPA/WPA2
Wireless Standards	IEEE 802.11ac/n/a 5GHz, IEEE 802.11b/g/n 2.4GHz
Wireless Speed	5GHz: Up to 867Mbps, 2.4GHz: Up to 300Mbps
Button	WPS/Reset
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing