CUH SDVC21-S - Remote Speed Control

CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
27
SDVC21-S
Variable Voltage Digital Controller for Vibratory Feeder
SDVC21SMSEN_4.012023-11
SensorⅡ
SensorⅡ
Preset
Preset
Ctrl Out
Ctrl Out
SensorⅠ
SensorⅠ
Photosensor
Photosensor
Speed Ctrl
Speed Ctrl
A1
A1
A2
A2
A3
A3
B1
B1
B2
B2
B3
B3
B4
B4
C1
C1
C2
C2
D1
D1
D2
D2
D3
D3
E1
E1
E2
E2
E3
E3
E4
E4
F1
F1
F2
F2
F3
F3
Suggest：
Please use a 1K linear potentiometer
When the remote speed control signal takes effect, the speed control indicator
lights on, at the same time regulating the voltage on the panel will fail.
Remote speed control
resistive ground
Remote speed control resistive ground
Remote speed control input
Remote speed control input
Remote speed control power supply+5V
The function of Speed Control allows the operator to control the
Output Voltage by an external potentiometer, 1~5V voltage or 4~20mA current.
Thus, external remote speed control can be easily achieved by a PLC, a DCS or
some other devices.
Remote
5.6 Remote Speed Control
Connection method of the external potentiometer
Connection method of the PLC