CUH SDVC31-M - Main Control Separation Parameter

CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
25
5.5.3 Main Control Separation Parameter
SDVC31 Series
Variable Frequency Digital Controller for Vibratory Feeder
SDVC31SMSEN_4.012023-08
Variable Frequency Digital Controller
for Vibr
atory Feeder
Variable Frequency Digital Controller
for Vibratory Feeder
Variable Frequency Digital Controller
for Vibratory Feeder
Variable Frequency Digital Controller
for Vibratory Feeder
Saturated
Saturated
Saturated
Saturated
Accelerate
Accelerate
Accelerate
Accelerate
Remote
Remote
Remote
Remote
Stop
Stop
Stop
Stop
Lock
Lock
Lock
Lock
Voltage
Voltage
Voltage
Voltage
Frequency
Frequency
Frequency
Frequency
On Delay
On Delay
On Delay
On Delay
Off Delay
Off Delay
Off Delay
Off Delay
Soft Start
Soft Start
Soft Start
Soft Start
SDVC31-M
SDVC31-M
SDVC31-M
SDVC31-M
8Long press and ▲
simultaneously to enter the
advanced parameter interface.
8Short press to switch to
Parameter Γ4.
8Press ▲ or ▼ to adjust the
parameter value.
Related
Separated
Main output is controlled
by Port C, Port D is
controlled by Port B
Main output is controlled
by Port B, Port D is
controlled by Port C
Parameter Γ4 is set to ___ by default.
l Main output
and control output are related. Controlled by
logical relation between intelligent
photoelectric sensor and switch sensor and
ON/OFF button
l Main output
and control output are separated. Main output
is controlled by the ON/OFF button. Control
output is controlled by the logical relation
between intelligent photoelectric sensor and
switch sensor.
lWhen Parameter Γ4 is set to , Main output is
controlled by the ON/OFF button, and the
switch sensor. Control output is controlled by
the intelligent photoelectric sensor.
lWhen Parameter Γ4 is set to , Main output is
controlled by the ON/OFF button, and the
intelligent photoelectric sensor. Control output
is controlled by the switch sensor.
When Parameter Γ4 is set to ,
the
.
When Parameter Γ4 is set to ,
Normally, main output was followed by control output.
In special applications, the control source and relationship can change by this parameter.