13
FOOD PROCESSOR ASSEMBLY
Before using your Cuisinart
®
CompleteChef™ Cooking Food
Processor for the first time, wash all
the parts (see Cleaning, Storage and
Maintenance instructions on page 36).
1. Place the Motor Housing Base on a dry,
level countertop with the controls facing
toward you. Do not plug the unit in until it is
fully assembled.
2. Place the Stainless Steel Work Bowl onto
the base and push down; you’ll hear it click
and feel it lock into place.
3. Select the accessory you want to use
(see list on pages 7–9 or use the accessory
recommendation displayed on your screen
when following a preset or recipe).
4. Hold the accessory by the center shaft, and
push down until it locks into place. Discs
are set onto the Stem Adapter, once it is
securely installed in Work Bowl. See images
for reference.
NOTE: To remove accessory, lift it out of
Work Bowl, being careful not to touch sharp
cutting edges.
NOTE: The BladeLock feature keeps Chopping
Blade, Whisk and Stirring Paddle in place
during processing, pouring, lifting, and handling,
but they are not permanently attached.
Handle with care. Always check to be sure
the accessory is securely engaged before
turning the bowl upside down.
PREPPING
Sample Blade Assembly
Sample Disc Assembly
To Next Page
Loading...
Need help?
General
