What to do if my Cuisinart Kitchen Appliances LCD displays 'E1'?
If the LCD of your Cuisinart Kitchen Appliance displays “E1” and beeps 10 times, this indicates a thermal control malfunction. In this case, you should contact the Consumer Service Center toll free at 1-800-726-0190.
What to do if my Cuisinart CPC-900 LCD displays 'E2'?
If the LCD of your Cuisinart Kitchen Appliance displays “E2” and beeps 10 times, this indicates a thermal control malfunction. In this case, you should contact the Consumer Service Center toll free at 1-800-726-0190.
Why does the word 'LID' appear on my Cuisinart CPC-900 LCD?
If the word LID appears in the LCD of your Cuisinart Kitchen Appliance, it means the lid is not closed properly. Turn the lid handle clockwise to close the lid into place.
Why is air escaping from the rim of the lid of my Cuisinart Kitchen Appliances?
If air is escaping from the rim of the lid of your Cuisinart Kitchen Appliance, it could be due to several reasons: * No sealing ring was installed: Install the sealing ring. * Food residue on the sealing ring: Clean the sealing ring. * The sealing ring is worn out: Replace the sealing ring.
Why is air continuously escaping from the red float valve on my Cuisinart CPC-900?
If air is continuously escaping from the red float valve of your Cuisinart Kitchen Appliance, it could be due to: * Food stuck on the sealing ring of the red float valve: Clean the sealing ring. * The sealing ring on the float valve is worn out: Replace the sealing ring.
Why does my Cuisinart CPC-900 Kitchen Appliances shut off when I press start?
If your Cuisinart Kitchen Appliance unit shuts off when START is pressed to begin pressure cooking, it may be because the Sauté/Brown function was just used and the temperature inside the unit is higher than the pressure cooking temperature, triggering a safety shutoff. To resolve this, either let the unit cool down for 2 or 3 minutes after using Sauté/Brown before starting pressure cooking, or add ½ cup more liquid to the unit.
What to do if I cannot open the lid of my Cuisinart CPC-900 Kitchen Appliances?
If you cannot open the lid of your Cuisinart Kitchen Appliance after releasing the pressure, it's likely that the red float valve is still up. Press the steam release button again.
Why is air escaping from the steam cover of my Cuisinart CPC-900?
If air is escaping from the steam cover of your Cuisinart Kitchen Appliance, it's likely that the pressure limit valve is not properly positioned. Remove the steam cover and ensure the pressure limit valve is properly installed.
Why is it difficult to close the lid of my Cuisinart CPC-900 Kitchen Appliances?
If it is difficult to close the lid of your Cuisinart Kitchen Appliance, the cooking pot may still be hot, causing steam to push the lid open. Allow contents to cool down for several minutes before fully engaging the lid.
How to fix a Cuisinart CPC-900 lid that does not lock?
If the lid of your Cuisinart Kitchen Appliance does not lock, it is possible that the sealing ring assembly is not properly installed in the lid. Re-install the sealing ring assembly as instructed.
Details various pressure cooking modes for different food types.
Explains non-pressure modes like Slow Cook and Sauté/Brown.
Instructions for automatic and independent keep warm functions.
Specific warranty service options for residents of California.
Steps to take before sending the product for service.
Details various pressure cooking modes for different food types.
Explains non-pressure modes like Slow Cook and Sauté/Brown.
Instructions for automatic and independent keep warm functions.
Specific warranty service options for residents of California.
Steps to take before sending the product for service.
General| Brand | Cuisinart |
|---|---|
| Model | CPC-900 Series |
| Category | Kitchen Appliances |
| Language | English |
To Next Page