Cuisinart CPG-465 - Step 2: Attaching Wheels to Support Legs; Step 3: Attaching the Bottom Shelf

A
B
C
x 4
x 4
x 4
STEP 3
-----------------------------------------------------------------------------------
• Attach the Bottom Shelf (35) to the legs using four
sets of Screw (A), Lock Washer (C), and Washer (B),
as shown. If the screw holes do not line up, the legs
may have been attached incorrectly in Step 2.
• Insert Stationary Support Legs (15) and Support Legs
(16) into the previously installed leg brackets. Note
the orientation of each part in the picture. Secure the
legs with two sets of Screw (A), Lock Washer (C), and
Washer (B) for each leg.
ASSEMBLY INSTRUCTIONS
STEP 2 - ATTACHING WHEELS TO SUPPORT LEGS
-----------------------------------------------------------------------------------
9
A
B
x 8
x 8
C
x 8