Cuisinart CPK18E - Use; Control Panel; Operation

17
3. USE
Before using for the rst time we recommend operating the
LFUUMFPSUJNFT'JMMUPUIF."9NBSLöMMMFWFM-CSJOH
to the boil and when boiling has nished and the kettle has
switched o, discard the water and rinse out the inside.
A. Control panel
On/Off Switch : used to turn the kettle on and o.
Temperature selector:  UFNQFSBUVSFT ¡$ ¡$
¡$¡$¡$BOE¡$
Keep Warm Button
: maintains the water
temperature for 30 minutes.
Cover release button
: to open the cover.
B. Operation
Heating water
t0QFOUIFDPWFSCZQSFTTJOHUIFCVUUPO .
t1PVS UIF EFTJSFE BNPVOU PG DPME XBUFS JO UIF LFUUMF
ensuring to keep between the “MIN” and “MAX” levels
marked on the water gauge.
t1VTIUIFMJEDMPTFEZPVXJMMGFFMBOEIFBSBTMJHIUjDMJDLx
t(FOUMZQMBDFUIFLFUUMFPOUIFCBTF
t1MVHUIFLFUUMFJOUPUIFNBJOT
t1SFTTUIFCVUUPOPGUIFEFTJSFEUFNQFSBUVSF
t1SFTTUIF CVUUPO
to heat the water. The temperature
button selected will ash. The water level indicator at the
rear of the kettle will turn on. An audio signal will sound for
1 second to indicate that the process has begun.
N.B. If the
switch is pressed but the temperature has not
CFFOTFUUIFLFUUMFXJMMEFGBVMUUP¡$
t8IFOUIFLFUUMFIBTSFBDIFEUIFTFMFDUFEUFNQFSBUVSFJU
will beep 5 times and switch o. The light illuminating the
water indicator window will turn o.
t5IFLFUUMFDBOBMTPCFUVSOFEPòBUBOZUJNFCZQSFTTJOH
the button or by removing it from the base.
N.B. The temperature can be changed at any time during the
boiling process by pressing one of the preset temperature
options. If the temperature selected during boiling is lower
than the temperature of the water in the kettle or the kettle
is o and the water is still hotter than the temperature
selected, the temperature button will ash, and the kettle
will switch o and beep 5 times once the water temperature
drop to the selected temperature. If the temperature
selected during boiling is same as the temperature of the
water in the kettle, it will switch o and beep 5 times. When
the kettle is o, select a temperature and then press On/O
switch, if the temperature of the water in the kettle is the
75°C
85°C
95°C
90°C
100°C
80°C