12
1. INTRODUCTION
Congratulations on your purchase!
For over 30 years, Cuisinart® has been developing a full
range of kitchen appliances that lets both passionate
amateurs and great chefs express their creativity to the
fullest.
All Cuisinart® appliances are the result of close
collaboration between engineers and great names
in Cookery like Paul Bocuse, the brand’s charismatic
ambassador. Every product combines sturdiness,
innovation, performance and ergonomics.
Made with professional materials like brushed stainless
steel, our products will easily fit into any kitchen thanks
to their simple and elegant design.
2. PRODUCT FEATURES
1. Lid
2. Bean hopper
3. Conical burr grinder (not shown)
4. 18-setting grind selector
5. Cup selector
6. Start/Stop button
7. LCD screen
8. Manual button
9. Grind chamber with lid
10. Motor base
11. Lead storage
3. USE
A. ASSEMBLING THE APPLIANCE
• Install the bean hopper onto the appliance base by
aligning the two notches then turning it clockwise to
lock in place.
• Place the lid on the hopper.
• Place the lid on the grind chamber then insert the
chamber its position in the base of the appliance.
B. DISMANTLING
• Make sure the bean hopper is empty. Pull it out by
turning counter-clockwise. Align the notches and lift.
• Remove the grind chamber by pulling it towards you.
1
2
5
6
7
8
11
4
9
10
To Next Page
Loading...
