EasyManua.ls Logo

Cuisinart ICE-M10 - Special Cord Set Instructions; Safety Features; Before Using for the First Time

Cuisinart ICE-M10
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
SPECIAL CORD SET INSTRUCTIONS
A short power-supply cord is provided to reduce the risks resulting from becoming entangled
in or tripping over a longer cord. Longer extension cords may be used if care is exercised in
their use.
If a long extension cord is used, the marked electrical rating of the extension cord should be at
least as great as the electrical rating of the appliance, and the longer cord should be arranged
so that it will not drape over the countertop or tabletop, where it can be pulled on by children
or animals, or tripped over.
CAUTION
• Do not immerse motor drive assembly in water.
• To reduce the risk of fire or electric shock, do not disassemble the motor drive assembly.
Note: The motor drive assembly does not contain any user-serviceable parts.
• Repairs should be made only by authorized personnel.
• Check voltage to be sure that the voltage indicated on the name plate agrees with your
voltage.
• Never clean with scouring powders or hard implements.
SAFETY FEATURES
The Cuisinart
®
Custom Scoops Ice Cream Maker is equipped with a safety feature that
automatically stops the unit if the motor overheats. This may occur if the ice cream is extremely
thick, if the unit has been running for an excessively long period of time, or if added ingredients
(nuts, etc.) are in extremely large pieces. To reset the unit, put the On/Off switch in the OFF
position (O) and unplug the unit. Let the unit cool off. After a few minutes, you may turn the unit
back on and continue making the dessert.
BEFORE USING FOR THE FIRST TIME
Remove all packaging materials from the ice cream maker. Wash the lid, freezer bowl, base and
mixing paddle in warm, soapy water to remove any dust or residue from the manufacturing and
shipping process.
DO NOT immerse the motor drive assembly in water. Wipe it with a moist cloth.
DO NOT clean any of the parts with abrasive cleaners or hard implements.