Cuisinart TOA-95 - GENERAL OPERATION; Oven Operation Steps; Adjusting Settings During Cooking

6
2. Press and hold the Time/Temp Dial for 3 seconds.
3. The clock hour will flash. Turn the knob to set hour, then press
Time/Temp Dial to confirm.
4. The clock minutes will flash. Turn the knob to set minutes, then press
Time/Temp Dial to confirm.
NOTE: If nothing is pressed, clock will automatically set to currently
displayed time.
NOTE: Once the LCD screen displays the clock, press any button or turn
any dial to go back to the main menu.
OVEN TONE VOLUME
The tone volume can only be adjusted when the time is displayed on
the screen.
1. Press AirFry and Dual Cook buttons simultaneously for 3 seconds.
2. The number 1 (default setting) or currently selected setting will display.
3. Turn the Time/Temp Dial to set preferred tone level: 0 (off/tones
deactivated), 1 (low), or 2 (high).
4. Once your selection is displayed, press Time/Temp Dial to confirm.
GENERAL OPERATION
To operate the oven, follow these simple steps:
1. Place the appropriate rack, pan, and/or basket in the position
recommended by the chart on page 7.
2. Use the Function Dial to scroll through functions.
3. When desired function is flashing, press Function Dial to confirm.
Start/Stop button will flash and LCD screen will display the last
selected or default temperature and time (shade and slices for
Toast and Bagel settings).
4. a. To use displayed settings, press Start/Stop to begin operation.
Start/Stop button will illuminate, indicating the unit is working.
b. To change settings:
1. Turn Time/Temp Dial to choose desired temperature
or shade
2. Press Time/Temp Dial to confirm; time (or slices) will flash.
3. Turn Time/Temp Dial to choose desired time (or slices).
4. Press Time/Temp Dial to confirm.
5. If desired, press Defrost button or Fan Speed button.
6. Press Start/Stop to begin operation. The button will
illuminate, indicating the unit is cooking.
NOTE: Bake and Pizza have a preheating stage during which display
will show “Preheat.” Once preheat is complete, oven will beep and
display will show “Ready” and countdown timer will begin.
5. When countdown timer reaches 0:00, oven will beep three times and
heaters will turn off.
NOTE: Cooking process can be canceled before countdown timer
reaches 0:00 by pressing Start/Stop.
NOTE: AFTER COOKING, FAN WILL REMAIN ON FOR COOLING
PURPOSES.
CHANGING TIME, TEMPERATURE,
OR FUNCTION DURING COOKING CYCLE
To change time: During the cooking cycle, use the Time/Temp Dial to add
or decrease time. The new countdown time will be displayed and cooking
will continue.
To change temperature: During the cooking cycle, press the Time/
Temp Dial until the current temperature flashes. Turn the Time/Temp Dial
to desired temperature and cooking will continue at the new tempera-
ture.
To change function: You must press Start/Stop to stop the current
program, then turn Function Dial and press it to select another function.
Press Start/Stop again to continue cooking cycle.