To Next PageTo Next Page
Need help?Do you have a question about the Culligan Aquasential RO and is the answer not in the manual?
General| Brand | Culligan |
|---|---|
| Model | Aquasential RO |
| Category | Water System |
| Language | English |
Guidance to read the manual to become familiar with the device and its capabilities before operation.
Guidelines for the proper disposal of lithium-ion batteries, emphasizing recycling and local regulations.
Details the required characteristics of the incoming water supply for optimal system performance.
Lists key physical and performance specifications for Aquasential RO and Smart RO models.
General guidance on system placement and tubing requirements for installation.
Instructions for installing an optional adapter for the RO drain line, ensuring proper orientation.
Details electrical connections for the Smart RO unit, including power and component hookups.
Explains the LED indicators on the Smart RO unit's front panel and their meanings.
Details leak sensor and wall mount bracket kit accessories for system installation.
Details the optional extension cable for standard RO systems with a light-equipped faucet.
Initial setup procedures for the Smart RO system, including firmware updates and settings configuration.
Final checks and cleanup procedures to be completed before leaving the installation site.
Guidance on explaining system operation, maintenance, and warranties to the customer.
Discusses key factors like pressure, temperature, and TDS that influence the RO system's performance.
Maintenance tasks that should be performed as required, such as cleaning the faucet.
Recommended annual maintenance including filter replacement and system checks.
Lists tools and materials required for performing system maintenance and checks.
Procedure for evaluating system performance metrics like water quality and quantity.
Method for measuring TDS levels of feed and product water to calculate removal efficiency.
Procedure for measuring product water flow rate and applying temperature correction factors.
Initial checks and procedures to perform before sanitizing or replacing filters.
Steps for sanitizing the system using a bleach solution and the sanitizer cartridge.
Details system errors and current operational status, including active and historical error logs.
Information on rejection percentage, TDS levels, system efficiency, and flow rates.
Details system pressure parameters and filter status, including remaining capacity and days left.
Provides high-level properties for membrane performance, rejection, and feed water conditions.
Details Wi-Fi connectivity status, signal strength, and general system information like serial number.
Covers app presets, firmware updates, and system requirements for the Service Pro app.
Explains menu options and functions for the Service Pro app, focusing on SRO initial setup.
Instructions for safely removing the top cover of the unit to access internal components.
Instructions for safely removing the rear cover of the unit to access internal components.
Explains the operation of the solenoids in closed and open states, detailing water flow control.
Troubleshooting steps for system errors, inadequate pre-charge pressure, and low water pressure.
Addresses issues with lights not working on the Smart Faucet or the system UI, and quality monitor lights.
Troubleshooting for water running to drain when idle and potential solenoid closing problems.
Troubleshooting for continuous water drainage, TDS discrepancies between app and manual tests.
Addresses poor membrane performance, external leak sensor alarms, and overflow at faucet air gap.
Troubleshooting for bad tasting water, black specks in product water, and carbon fines.
Diagram illustrating various service parts of the system with corresponding numerical labels.
Details operating system requirements and installation steps for the Service Pro app.
Explains menu options and functions for the Service Pro app, focusing on SRO initial setup.
Instructions for installing the Culligan Connect app on iOS and Android devices.
Specifies Wi-Fi and Bluetooth requirements for system connectivity with the Culligan Connect app.
