Need help?Do you have a question about the Culligan Aquasential Tankless RO and is the answer not in the manual?
General| Product Type | Tankless Reverse Osmosis System |
|---|---|
| Installation Type | Under Sink |
| Feed Water Pressure | 40-100 psi |
| Feed Water Temperature | 40-100°F |
| TDS Reduction | Up to 99% |
| Tank Design | Tankless |
| Waste Water Ratio | 1:1 |
| Certifications | NSF/ANSI Standard 58 |
| Membrane Type | RO Membrane |
| Warranty | 1-year limited warranty |
| Filter Life | 12 months |
Summarizes critical safety instructions for electrical shock, improper installation, fire risk, and use by children.
Explains the manual's purpose, equipment features, and how to use safety notations.
Details on interpreting 'Notice', 'Caution', and 'Warning' symbols for safe operation.
Explains the role of CF pre-filtration and RO membrane in water purification.
Details on system testing and certification by WQA against NSF/ANSI standards.
Highlights specific plumbing code requirements for installations in Massachusetts.
Details the capacity and lifespan for CF, RO, and CB filter cartridges.
Provides physical dimensions, power requirements, and electrical specifications.
Lists inlet water pressure, temperature, and flow rate specifications.
Specifies daily production rate, part number, and system recovery rating.
Covers pressure, TDS, hardness, iron, and their impact on RO membrane function.
Defines product water recovery and provides the standard calculation formula.
Explains the color codes for inlet and filtered water quality (Excellent, Normal, Poor).
Details the real-time TDS monitoring and malfunction code display.
Lists indicator status (Solid/Blinking Blue/Orange/Red) and their corresponding meanings.
Describes the faucet's water quality indicator, its color, and TDS value correlation.
Explains how the circular indicator shows remaining life for CF, RO, and CB filters.
Details the indicator behavior during initial flush and filter replacement flush cycles.
Outlines 'As Needed' and 'Annually' tasks for filter replacement and system checks.
Provides solutions for water leaks, no power, and unit shutdown issues.
Advises on professional service for sanitization and membrane replacement.
Addresses issues like low water flow, booster pump noise, and high TDS.
Explains specific malfunction codes (E01-E05) and their corresponding recovery procedures.
Lists daily production, operating temperature, pressure, and electrical requirements.
Details test conditions and average percent reduction for Total Dissolved Solids.
Highlights WQA certifications and important cautions regarding water quality.
Fields for recording model, serial number, installation date, and service contact.
Table for logging filter changes, feed TDS, and product TDS readings over time.
Details warranty periods for the unit, faucet, and internal components, excluding filters.
Lists conditions that void the warranty and disclaims implied warranties and damages.
Explains specific legal rights and how warranty may vary by state.
To Next Page
