To Next PageTo Next Page
Need help?Do you have a question about the Culligan Aquasential 9 and is the answer not in the manual?
General| Brand | Culligan |
|---|---|
| Model | Aquasential 9 |
| Category | Water Filtration Systems |
| Language | English |
Guidance on how to best utilize the installation manual for optimal understanding.
Defines key terms like NOTE, CAUTION, and WARNING for hazard communication.
Detailed technical specifications for various Aquasential Smart HE Softener models.
Instructions for determining the optimal installation location and physical placement.
Step-by-step procedure for correctly loading the water softening resin into the tank.
Guidelines and diagrams for connecting the water softener to the plumbing system.
Detailed instructions for installing the bypass valve assembly.
Procedure for installing the brine tank and its associated components.
Information regarding the required power supply and its connection.
Overview and identification of components on the main GBX circuit board.
Instructions for installing the Aqua-Sensor probe for conductivity monitoring.
Procedure for installing the salt level monitor in the brine tank.
Guide to adjusting the Dial-a-Softness knob for water hardness control.
Explanation of the controller keypad layout and functions.
Step-by-step instructions for initial system start-up after installation.
Procedure for sanitizing the water softener system.
Instructions on how and when to use the system's bypass valve.
Recommended schedule for routine inspection and maintenance of the system.
Steps for diagnosing system issues and identifying problems.
Procedure for removing and replacing the main circuit board.
Instructions for safely removing and replacing the gear motor.
Troubleshooting steps for brine system issues and common problems.
Specific troubleshooting advice for the Aqua-Sensor system.
Diagrams illustrating the sequence of operations during downflow regeneration.
Diagrams illustrating the sequence of operations during upflow regeneration.
Flow diagram for the 'Service' stage of downflow regeneration.
Flow diagram for the 'Backwash' stage of downflow regeneration.
Flow diagram for the 'Brine Draw' stage of upflow regeneration.
List of parts for the water softener control valve assembly.
Overview of the regeneration sequence for Softener-Cleer models.
Instructions for adding KDF media to Softener-Cleer Plus models.
Explanation of the water softening process and ion exchange principles.
Detailed explanation of the resin regeneration process steps.
Method for calculating compensated hardness for iron reduction applications.
Installation guide for brine reclaim on twin alternating systems.
Common issues and solutions for the brine reclaim system.
