Need help?Do you have a question about the Culligan M1 Series and is the answer not in the manual?
General| Stages | 1 |
|---|---|
| Operating Temperature | 40 - 100 °F |
| Weight | 12 lbs |
| System Type | Whole House |
| Connection Size | 1" NPT |
Highlights safety notices, cautions, and warnings to ensure safe installation, operation, and maintenance.
Step-by-step guide for installing the prefilter cartridge into the housing.
Guides the connection of feed water tubing, including recommendations for valves and regulators.
Details how to connect the concentrate (waste) tubing, emphasizing anti-siphon measures.
Explains how to connect the product water tubing and precautions for preventing backflow.
Provides essential recommendations before performing electrical installation, adhering to codes.
Details how to open the control panel and access high voltage connections.
Explains how the controller behaves upon initial power application and startup sequences.
Details how to configure the DIP switches to set the product water TDS threshold.
Provides a guide to diagnose and resolve common problems encountered with the RO unit.
Step-by-step procedure for replacing the pump, including common failure causes.
Detailed instructions for replacing the unit's motor.
Procedure for replacing RO membranes, including handling and lubrication precautions.
To Next Page
