Culligan S-W100-C - Specifications

2
18007217360
MONDAYFRIDAY
8:00AM4:30PM (CST)
English
SPECIFICATIONS
Operating Pressure Range: 40–125 psi (280–690 kPa)
Operating Temperature Range: 40–120°F (4–49°C)
Rated Service Flow: 1.8 gpm (6.8 L/min) MAX @ 80 psi
Capacity: 10,000 gallons (38,000 liters)
PRECAUTIONS
WARNING: Do not use with water that is microbiologically unsafe
or of unknown quality without adequate disinfection before or after
the unit. Do not pull on showerhead or use showerhead or shower
arm for support. The contaminants or other substances removed or
reduced by this water treatment device may not necessarily be in
your water.
CAUTION: Filter must be protected against freezing which can
cause cracking and water leakage.
• Do not use harsh chemicals or abrasives such as chlorine bleach,
cleaning fluids or abrasive pads to clean the showerhead.
• This system is not to be used for drinking water purposes.
• Showerhead is limited to 1.8 gpm (6.8 L/min) MAX at 80 psi.
• For use with automatic compensating valves rated at 1.8 gpm
(6.8 L/min) MAX or less.
• Product to be used with a certified method of backflow prevention.
INCLUDED:
• Showerhead
• WHR-140 Filter Cartridge
PARTS