4
INSTALLATION
• Installs on standard 1/2˝ threaded shower arm.
• This shower head will not function without a filter cartridge in place.
Remove existing showerhead
from shower arm by turning
counterclockwise.
Hold the body of the showerhead
firmly in one hand. With the
other hand, turn the
ribbed ring behind the face
counterclockwise to unscrew.
Clean any debris that may be
present on the threads.
Wrap plumbers tape tightly around
shower arm threads.
REMOVE STICKERS FROM BOTH
SIDES OF NEW CARTRIDGE
BEFORE INSTALLING.
Place new filter cartridge into
position by pushing cartridge down
into cavity until seated.
HOLD
LOOSEN
1
3
2
4
To Next Page
Loading...
