CUMMINS ALLISON Universal JetScan User Manual

17
Stopping Conditions and Recovery Steps
Universal JetScan will stop for a variety of reasons, all of which require action by the user.
Condition
Action
Universal JetScan may have
processed two or more notes as
one.
Remove all notes from the pocket indicated on the screen and place them
on the hopper. Press
CONT
.
If the alarm repeatedly occurs, adjust the gray thickness adjustment dial
located on top of the machine behind the hopper extension. Rotate in the
negative (
-
) direction as indicated by numbers on front of the dial.
Condition
Action
The machine is operating in the
sort mode and has detected a
new denomination value.
Remove all notes from the pocket indicated on the screen and place them
with other processed notes. Universal JetScan automatically will restart
and resume processing.
Condition
Action
The machine has diverted notes
to the wrong pocket.
Remove all notes from the pocket indicated on the screen and place them
in the hopper; press
CONT
. Universal JetScan will revert to the previous
note count before the error occurred with no impact on batch (strap), sub-
batch, batch and day totals.
© 2014 Cummins-Allison Corp.

CUMMINS ALLISON Universal JetScan Specifications

General

Brand	CUMMINS ALLISON
Model	Universal JetScan
Category	Banknote Counter
Language	English