CUMMINS ALLISON Universal JetScan User Manual

4
USA
MODE : STR1 STRAP LIMIT: 100
SB : USD 0
BAT : USD 0
ADD
MENU
VERFY
SD/CF
MODE
END
FACE
STRAP
RIGHT
CONT
CNTRY
Main-Operating Screen
All two-pocket Universal JetScan
®
note scanner operations are performed on the touch-panel
display, which can be adjusted up to a 95-degree angle from the floor.
The main-operating screen is shown below:
Key Explanation
Main-Operating Screen Key
Description
RIGHT
This key is used to quickly “right” or “orient” a stack of notes. The
machine scans the first note processed and delivers all notes with this
orientation to pocket one. Notes with the opposite orientation are
delivered to pocket two. Universal JetScan is not
tracking counts in
this mode.
FACE
This key is used to quickly face notes. The machine scans the first
note processed and delivers it to pocket one either face up (portrait
side up) or face down (back side up). Notes with the opposite facing
are delivered to pocket two. Universal JetScan is not
tracking counts in
this mode.
CNTRY
This key is used to select a specific country’s currency for processing.
STRAP
This key prompts the STRAP screen. Batch (strap) limits may be set,
and batch (strap) counts may be cleared.
CONT
This key starts the motor.
END
This key clears current batch totals. If SUB BATCH is ON, then pressing
END
once clears the sub-batch total and pressing
END
a second time
clears the batch total. If
SUB BATCH
is
OFF
, then pressing
END
once
clears the batch total.
Two-Pocket Universal JetScan
®
Note Scanner All Models

CUMMINS ALLISON Universal JetScan Specifications

General

Brand	CUMMINS ALLISON
Model	Universal JetScan
Category	Banknote Counter
Language	English