EasyManua.ls Logo

Cuppone PZF/30 - Checks before Purchasing

Cuppone PZF/30
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Ed. 0121 - 70702570 REV02 Pizzaform - Pre-installation
min.
500 mm
( in. 19,7
)
Max 35°C
Max 70%
Min 5°C
Max 104°F
Min 41°C
Fig. 1
Fig. 2
Before purchasing the product and installing it, check the fol-
lowing conditions, necessary for the correct installation, opera-
tion and maintenance of the product.
A Transport (Owner’s inspection)
√ Make sure that, on the day when you receive the prod-
uct or it is installed:
• Fig. 1
lifting equipment is available that can handle
the appliance safely (check weight and dimensions in
the following pages), together with staff qualified to
carry out this operation;
• personal protection equipment is available (e.g. safety
shoes, gloves, etc.)
B Installation room (Owner’s inspection)
√ Make sure that:
• the floor of the installation room is fireproof, perfect-
ly flat and capable of withstanding the weight of the
appliance;
• Fig. 2 the installation room:
•is dedicated and suitable to cooking food;
•has adequate air ventilation;
•complies with the current regulations on health
and safety and systems in the workplace;
•is protected from the weather;
•has a maximum temperature of between +5° (41°F)
and +35°C (104°F);
•has a maximum humidity of 70%.
• the appliance easily passes through doorways;
• Fig. 3
there are NO other sources of heat (i.e. grills, fry-
ers, etc.), highly flammable substances or fuels (i.e. gaso-
line, petrol, bottles of alcohol, etc...) in the vicinity of the
appliance. It is absolutely necessary to comply with the
minimum safety distances between the product and
other flammable equipment or materials.
•The distances indicated must be increased in case of
objects in heat-sensitive materials.
• there is adequate ventilation according to the reg-
ulations in force in the Country of installation. If this is
not the case, a ø140 mm [Ø5.51”] air intake is manda-
tory, communicating with the outside or a ventilated
room (i.e. storeroom, attic, garage, basement).
When choosing the positioning room, take into account
that the appliance must be easy to move for any
extraordinary maintenance: be careful since any
brickwork after installation (e.g.: wall construction, door
replacement with narrower ones, renovations, etc.) do not
hamper movements.
1
CHECKS BEFORE PURCHASING