14
U-shaped drain
hose holder
Water drain hose
• Do not bend your drain hose.
• You may use the U-shaped drain hose
holder to secure your drain hose and to
avoid bending it.
• Secure the water drain hose to the waste
pipe to avoid it coming o during the
washing process.
Before connecting to the waste pipe,
make sure to check the waste pipe
and remove any stopper or blockage
inside, otherwise the unit may not be
able to expel the waste water properly.
• The waste pipe must only be
connected to the foul drains and not
the surface water drainage system.
• The water drain hose should be
placed between 40 cm and 100 cm
from the oor level and must not be
extended, otherwise the unit may
not be able to expel the waste water
properly.
• Please close the hydrant after using.
CID45B16/A_IB_RC_190828_grace.indd 14 28/8/2019 10:52 AM
To Next Page
Loading...
