EasyManua.ls Logo

Curt Group 60639 - Towing Tips; Driving and Clearance; Equipment Checks; Trailer Loading and Weight

Curt Group 60639
3 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CURTMFG.COM
NEED ASSISTANCE?
877.287.8 634
60639-INS-RA
PAGE 3
TOWING TIPS
Towing Tips
Driving a tow vehicle Verify adequate turning clearance between the truck cab / box corners and trailer(s).
Verify the trailer safety chain length. Too much slack in the chain may prevent maintaining control
in the event of separation. Leave only enough slack to allow full turning without interference.
Check your equipment Periodically check the condition of all towing equipment. Ensure all fasteners are tight and
that all structural components are sound. Do not tow a trailer with worn or damaged parts.
Check truck box clearance. There should be a minimum clearance of
6" between the bottom of the trailer's overhang and the top of the box sides.
Verify all anchors are properly installed, secured with lynch pins, and the trailer attachments
to the safety chain anchors are secure (cannot be shaken free during towing).
Attach trailer securely to safety chain anchors.
Ensure the safety chains and hooks are rated to the load capacity of the trailer.
Trailer loading Proper trailer loading is very important.
Heavy items should be placed close to the floor near the trailer axle center line. The load should
be balanced side to side and firmly secured in the trailer to prevent shifting. Tongue weight should
be 10-15% or the gross trailer weight for most trailers. Too low of a tongue weight often produces
tendency to sway.
Never load the trailer heaver behind the trailer axle(s).
Towing vehicle and trailer
manufacturer's recommendations
Review the owner's manual for your towing vehicle and trailer
for specific recommendations, capacities and requirements.
Trailer lights, turn signals
and electric brakes
Verify trailer lights, electric brakes and breakaway switches are working properly.
Tire inflation Unless specified by the towing vehicle or trailer manufacturer,
tires should be inflated to their maximum recommended pressure.
Properly Installed System
Always install both safety chain loops
in the rear-most puck system mounts.
Gooseneck ball
Rear of truck bed
Safety chain anchor
Puck system mount

Related product manuals