curt 11291 User Manual

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND
CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing LLC. may repair or replace
the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement
of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
MAKE: STYLE:
MIN.20
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
WEIGHT CARRYING:
INSTALLATION TIPS: INSTALLATION TIME:
INSTALLATION REQUIRES:
VEHICLE PHOTO:
HITCH ILLUSTRATION:
REPRESENTATIVE PHOTO
MAKE SURE YOUR HITCH MATCHES
LEVEL OF DIFFICULTY: MODERATE
EASY MODERATE CHALLENGING
THE INSTALL TIME LISTED IS FOR PROFESSIONAL
INSTALLERS. IF YOU ARE HESITANT TO UNDERTAKE
THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED
CURT INSTALLER FOR ADDITIONAL ASSISTANCE.
1. BEFORE YOU BEGIN INSTALLATION, READ ALL
INSTRUCTIONS THOROUGHLY.
2. TO EASE INSTALLATION, 2 PEOPLE MAY BE
REQUIRED.
3. USING PROPER TOOLS WILL GREATLY IMPROVE
THE QUALITY OF THE INSTALL AND REDUCE THE
TIME REQUIRED.
4. NEED HELP OR HAVE SOME QUESTIONS?
CALL TECHNICAL SUPPORT AT 800.798.0813
Safety glasses should be
worn at all times while
installing this product
.
YEARS:
2012-PRESENT SCION MODEL:
iQ
COMPACT
1,000
150
TRAILER WEIGHT:
TONGUE WEIGHT:
11291 INSTALLATION INSTRUCTIONS
LBS.
LBS.
3/22/2013
WARNING:
WE RECOMMEND THE USE OF 18050 STABILIZING STRAPS FOR ALL NON-TRAILER
(WHEEL-LESS) LOADS. PLEASE SEE THE CURT CATALOG OR VISIT US ONLINE AT
WWW.CURTMFG.COM FOR FURTHER INFORMATION.
DIE GRINDER
RATCHET
SAFETY
GLASSES
SOCKET
9/16"
11/16"
SOCKET
EXTENSION
6"
TORQUE
WRENCH
- HOLE ENLARGEMENT
- FISHWIRE HARDWARE

curt 11291 Specifications

General

Tongue Weight (TW)	200 lbs
Receiver Tube Size	1-1/4 inch
Finish	Gloss Black Powder Coat
Material	Steel
Maximum Tongue Weight (TW)	200 lbs
Gross Trailer Weight Capacity (GTW)	2000 lbs
Maximum Gross Trailer Weight (GTW)	2000 lbs

Summary

General Information and Safety

Safety Precautions

Wear safety glasses at all times while installing this product.

Vehicle and Towing Capacity

Specifies vehicle model, year, and recommended towing capacity limits.

Installation Overview

Provides estimated installation time and general tips for a successful installation.

Tools and Requirements

Required Tools

Lists essential tools for the installation process.

Installation Difficulty

Indicates the general difficulty level of the installation.

Installation Walkthrough

Hole Enlargement

Enlarge existing holes to allow carriage bolts and spacers to pass through.

Fishwire Installation

Reverse fishwire carriage bolts and spacers through enlarged access holes.

Hitch Positioning and Securing

Raise hitch into position and loosely secure to carriage bolts.

Side Plate Alignment

Align side plates with tow loops and secure with specified hardware.

Torque Specifications

Torque all 7/16" hardware to 70 ft-lbs and 3/8" hardware to 45 ft-lbs.

Important Warnings and Notes

Load Capacity Warning

Do not exceed vehicle manufacturer's recommended towing capacity.

Non-Trailer Load Support

All non-trailer loads must be supported by stabilizing straps.

Periodic Inspection

Periodically check hitch for tight fasteners and sound structural components.