Curtis 1356 - Power Supply Outputs and Connections

Curtis 1356/1356P CAN Expansion Module Manual, Rev. A
15
2 — INSTALLATION & WIRING: I/O Signal Specifications
Auxiliary Power Supplies
e 1356 /1356P provides +12V and +5V auxiliary output power for low pow-
er circuits such as ngertip joysticks, electronic throttle, Curtis programmer,
Curtis 840 display, or remote I/O boards. e return line for these low power
circuits is I/O GND. e maximum total combined output current is 200 mA.
1
13
12
24
1
3
2
4
Power
e power pins are each capable of carrying up to 9 A. Every application must
use B+ (J1-1) and B- (J1-13).
1
13
12
24
AUXILIARY POWER SUPPLY SPECIFICATIONS
signal name pin v out v out tolerance i out (max) ripple/noise
+12V J2-4 12 V 10 % 100 mA 2 %
+5V J1-12 5 V 5 % 100 mA 2 %