Service & Sales
1- 800-421- 6150 www.wilburcurtis.com
OPERATION INSTRUCTIONS
The FreshTrac™ timer uses
three LED lights (red, yellow
and green), as a visual time
indicator.
When a brew cycle begins, five
quick red flashes indicate that
the timer has started.
The green LED will flash every 15 seconds during
the brew cycle and will continue until 25 minutes
have elapsed.
At 25 minutes, a yellow LED will flash every 3-5
seconds for 5 minutes. This will continue for 5
minutes until 30 minutes has elapsed.
At 30 minutes, the red LED will flash every 3-5
seconds until 60 minutes have elapsed. The red
led indicates that the hold time has elapsed and
any remaining coffee should be discarded.
All flashing LEDs will stop. A new brew cycle will
start restart the FreshTrac™ timer.
1
2
FreshTrac™ timer on the decanter Brewing Instructions
Place empty decanter on the warmer plate under
the brew basket.
Place a new filter in the brew basket.
Pour pre-determined amount of ground coffee into
the filter.
Slide brew basket into the brew rails.
Press the brew button.
1
2
Brewer should be on (conrm at rear toggle switch, then
press on/off button). Ready-to-Brew should be displayed.
FreshTrac
™
Transmitter
3
4
5
3
4
5
6
ACCESSORIES
70517430303
McCafe Decanter - Regular
with FreshTrac™ Transmitter
White ink/black handle
WRIN 10560-000
70517430103
McCafe Decanter - Decaf
with FreshTrac™ Transmitter
White ink/orange handle
WRIN 10562-000
70217430303
McCafe Decanter - Regular
without FreshTrac™ Transmitter
White ink/black handle
WRIN 10561-000
70217430103
McCafe Decanter - Decaf
without FreshTrac™ Transmitter
White ink/orange handle
WRIN 10563-000
WC -10 011
FreshTrac™ Transmitter
On/RFID Collar Assembly
To Next Page
Loading...
