Service & Sales
1- 800-421- 6150 www.wilburcurtis.com
www.wilburcurtis.com
FEB/2014 M18_OG_MD_FreshTrac_revA
QUICK VOLUME/TEMPERATURE ADJUSTMENT
The UCM must be on. To adjust the ALP1GT models, press and hold the center, Select button . The screen will read
pressing < or > will adjust the brew volume up or down ± 20 oz., in 1 ounce increments.
On any multi-station Alpha (ALP2/3/4/5/6GT: Press the center Select button twice, with the second press, hold
down the button for around five (5) seconds. The screen will display pressing < or > will adjust the brew
volume up or down, ± 20 oz., in 1 ounce increments.
Turn on brewer at the control panel ON/OFF button. Press and hold button (see illustration below) for 5 seconds.
Water temperature will be displayed. The temperature will not display while the unit is in the process of reheating.
NOTE: Alpha 3GT ONLY; when checking tank temperature, first make sure REAR warmer is ON (red LED on) and then
press for 5 seconds to display tank temperature.
Quick Volume Adjustment
Tank Temperature Check
To Previous Page
Loading...
