Curtis CBHT - Installation and Cleaning; Rough-In Drawing; Daily Cleaning Procedures

11
COFFEE BREW BASKET TEA BREW BASKET
18.13”
(46.1 cm)
22.88”
(58.1 cm)
36.75”
(93.3 cm)
3.75”
(9.5 cm)
10.25”
(26.0 cm)
12.50”
(31.8 cm)
23.13”
(58.8 cm)
24.25”
(61.6 cm)
20.88”
(53.0 cm)
1.25”
(3.2 cm)
22.00”
(55.9 cm)
23.63”
(60.0 cm)
Rough-In Drawing
DAILY
1. Wipe any spills, dust or debris from the exterior surfaces with a damp cloth. The
outside surfaces of the brewer should be cleaned with stainless steel polish only, to
prevent scratches.
2. Clean the spray head and domed area around the spray head with a mild detergent
and warm water solution. Scrub well to remove residue. Rinse with and clear water.
Dry with clean cloth.
3. Remove the plastic brew basket and wash with a detergent solution or put through
a dishwasher.
4. Wash the beverage dispenser.
a. Clean dispenser and top cover with a detergent solution.
b. Remove the faucet assembly. Unscrew the handle assembly from the
faucet. Clean the faucet shank with a gauge glass brush (circular bristle)
by pushing the brush through the shank.
c. Dry and assemble parts.
CAUTION: DO NOT
use undiluted bleach or
chlorine.
Cleaning The Brewer
CAUTION: Never remove
faucet when container is
full.Draincontainerrst.