To Next PageTo Next Page
Need help?Do you have a question about the Curtis Cafe Primo Cappuccino and is the answer not in the manual?
Details electrical supply, dimensions, and water supply requirements for various models.
Explains the meaning of danger, warning, caution, notice, and important symbols used in the manual.
Provides crucial safety warnings and conventions for operating the appliance safely.
Outlines necessary requirements for installation, including power, water filtration, and plumbing connections.
Steps for flushing the water line and connecting it to the dispenser's water inlet.
Guidance on connecting the 120V power cord to the appropriate electrical outlet.
Steps to turn on the water supply, check the circuit breaker, and start the unit.
Detailed steps for dispensing beverages using preset or manual modes.
Step-by-step guide to read and change the water temperature settings.
Procedure to set dispense buttons to dispense a specific amount of product automatically.
Procedure to reset dispense buttons from preset mode back to manual dispensing.
Instructions for setting the product powder to water ratio for each dispense button.
Detailed wiring diagram for domestic models of the CAFEPC dispenser.
Detailed wiring diagram for export models of the CAFEPC dispenser.
Important safety warnings and notes regarding troubleshooting procedures.
General advice on using the troubleshooting guide, error codes, and leveling.
Steps to test dump and inlet valve coils for shorts or open circuits using a multimeter.
Procedure for calibrating dump valves after installation or replacement.
Explains how error codes are indicated by the STOP/WASH light patterns.
Details error messages, warning descriptions, and their causes.
General
