Curtis CBHT - Advanced UCM Brewing Settings

6
Brew By Time
Dilut. Time
Pre-infusion
Pulse Brew On/Off
Brew by Time (Factory settings: LARGE 5min-25sec. SMALL 1min-52sec.)
The next item in the sequence is Brew by Time. Press  to select and to change the brew time. The display will now show the
current time. By pressing ◄ or ► you can toggle back and forth from minutes to seconds and to exit (ex). Change the time or
set and exit by pressing the  button.
Pre-Infusion (factory disabled)
Press  to select. The current setting is displayed in seconds. Press ◄ to decrease or ►toincrease(rangefromOFFto10
through 60 seconds). Press tosetandexit.IfPre-infusionisselected(ON),ColdBrewLockissettoDelta1within5ºFofthe
set point and Cold Brew Lock disappears from the list of program selections. When Pre-infusion is ON, Pulse Brew disappears
from the list of program selections.
Pulse Brew (factory setting C)
Press toselect.Press◄or►toselectOFForoneofvepulsepatterns(AtoE).ThevePulseBrewoptionshelp
“tune”orchangethecoffeeavor.
Guidelines for Pulse Brew:
Filter Pack type coffees typically extract better with the A and B pulse setting.
Decaf coffees typically extract better with the B pulse setting.
High-yield coffees typically extract better with the C pulse setting. Of course, any of the A, B or C settings may be used to suit
yourtasteprole.
Settings D and E are manual pulse counts.
To exit from Pulse Brew mode, select 0 for the time.
IfPulseBrewisturnedon,ColdBrewLockissettoDelta1within5ºFofthesetpointandColdBrewLockdisappearsfromthe
list of program selections. When Pulse Brew is on, Pre-infusion disappears from the list of program selections.
By-Pass (factory settings: LARGE 35%. SMALL Off.)
The By-Pass On/Off option helps with controlling extraction with larger brews. Contact time that is too long will extract undesir-
ablebitter,harshavorcompounds.By-passingsomeofthebrewwateraroundthecoffeebedwillbalancetheextraction.Press
 to display the current setting. Press◄or►tochoosethesetting(OFF,1%to50%).Press  to set and exit.
By-Pass On/Off
Dilut. Delay
Brew By Volume
Brew By Time
Dilut. Volume
Tea Pulse Brew
Select Button – You may select a tea brew button to program from the buttons on the UCM.
Brew by Volume
Press  to select. The display will read Select Brew Button. Once the desired BREW button is selected, the display will read
“Press BREW to Start” and hot water starts dispensing. When the desired volume is reached, press the BREW button again to
stoptheow.Thebrewvolumehasnowbeenset.WhenEXITisdisplayed,press to select and exit.
Brew by Time (factory set to Full 3 min 32 sec, Half 1 min 46 sec)
Press toselect.Press◄or►toincreaseordecreasetime.TeabyTimehasarangeof0:00to9:59(incrementsare
minutes and seconds). The HALF BREW button will be set at half the brew time.
Dilution Delay (factory set to Full 30 sec, Half 30 sec)
Press toselect.Press◄or►totogglebetweenStandard-Gray(30sec),Standard-Purple(30sec),Tropical-Gray(9
min),Tropical-Purple(9min),76/308-Gray(4min)and76/308-Purple(4min).Therangeisfrom0secondsto10minutes;in30
second increments.
Dilution Volume
Press  to select. The display will now show “Push START To Begin...”. Press the BREW button, then water starts running.
Whenthedesiredvolumeisreached,presstheBREWbuttonagaintostoptheow.Nowthevolumehasbeenset.Pressing
the►buttonwilldisplaythesubsequentmenufeatures.
Dilution Time (factory set to Full 4 min 5 sec, Half 2 min 2 sec)
Press toselect.Press◄or►totogglebetweenStandard-Gray(4min-5sec),Standard-Purple(4min-5sec),Tropical-Gray
(4min-26sec), Tropical-Purple (4min-26sec), 76/308-Gray (4min-55sec) and 76/308-Purple (4min-55sec). The setting range is
from0secto9min,59sec,in1secondincrements.
Tea Pulse Brew (factory set to OFF).
Press toselect.Press◄or►tochooseON,OFF,orD.SelectingONwillgiveapulsingpatternof1to20pulses.InD,
thepulsetimecanbesetforON,from5to150seconds(adjustablein5secincrements).Offtimeisfrom5to150seconds,
adjustable in 5 second increments.
Select Button