Curtis dvd5041 - Return Function; Mark and Playback Memory; Clear Input Function

23
FUNCTION BUTTONS
Return
1
In PBC mode, when pressing “RETURN” Key to
return to the menu, thus canceling the PBC mode ,
the “RETURN” key will be invalid
21
RETURN
Mark
1
STORING MARKS MEMORY
1. Press the “MARK” button on remote control during the disc
is played and the menu of mark setting with two bookmarks
will appear on the screen.
2. Use the direction buttons ( or ) on the remote control to
select mark numbers (Bookmarks 1, 2 ), and press
ENTER button to enter the playing times where you would like
to view again afterwards. A maximum of two marks can be
stored.
3. Press “CLEAR” button to clear a particular mark. Press “MARK”
button to clear the display.
PLAYBACK FROM A MARKED POSITION
1. Press the “MARK” button on the remote control to display
the menu of mark setting on the screen.
2. Use the direction buttons ( or ) on the remote control to
select your desired mark, and press “ENTER” button to
start to playback from that point.
3. Marked positions can be recalled anytime by pressing
“MARK” button on the remote control.
All the marks are cleared when the power is off or the disc is removed.
2
3
Note:
Clear
1
Setting program or searching need to input number. press
CLEAR button to clear the number when the input
number is wrong.
21
CLEAR
STEP
STEP
STEP