SYSTEM CONNECTION
Preparations
Accessories
1. Remote controller 2. Audio/Video cable 3. User's manual
(check whether be fully equipped after open the box)
Battery installation of remote controller
Place two AAA(UM-4) in the battery compartment. Be sure the polarities are correct. There
should be no large obstacles between the remote controller and the main unit.
System connection
1. When making connection between this unit and other components, be sure all
connection with power-off.
2. Audio/Video cables are connected according to the different colour identification and
they should be fitted firmly.
Yellow to video terminal
White to audio terminal L
Red to audio terminal R
3. Scheme of connection
WITH YPbPr CONNECTION
TO TV YPbPr OUTPUT
5.1 CHANNEL CONNECTION
75
TO Y Pr OUTPUTPb
TO COAXIAL OUTPUT
TO VIDEO OUTPUT
TO OPTICAL OUTPUT
TO S-VIDEO OUTPUT
TO 2CH L OUTPUT
TO 2CH R OUTPUT
TO VIDEO1/VIDEO2 OUTPUT
TO CEN OUTPUT
TO SL OUTPUT
TO FL OUTPUT
TO FR OUTPUT
TO SR OUTPUT
TO SW OUTPUT
Av1[input L,R,Video ]
Note:
To Next Page
Loading...
