OPERATING INSTRUCTIONS OI12
Brewing Instructions
2 Remove/open an empty
coffee or tea dispenser and
position it on the brew deck
(shelf). Center it under the
brew basket.
TEA
DISPENSER
3 Select the brew basket
labeled for the type of
beverage being brewed
(coffee or iced tea) and insert
BDMFBOQBQFSmMUFS
4 Fill with the proper amount of
coffee or leaf tea. Level the
DPGGFFUFBJOUIFmMUFS
5 4MJEFUIFmMMFECSFXCBTLFU
into the brew rails under the
control panel. Slide it all the
way back until it stops.
The brewer will brew coffee or tea based on the settings programmed into the universal control module (UCM). To
change the settings, see the PROGRAMMING GUIDE.
1 The brewer should be ON.
$POmSNUIJTBUUIFSFBSUPHHMF
switch. “Ready to brew”
should be on the display.
6 Press the brew button. Brewing
will begin immediately.
WARNING - TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the brewer during
brewing. Do not remove the brew basket while “Brewing” appears on the display.
WARNING - DO NOT refrigerate unused tea overnight for later consumption.
The G3 Combo Brewer is factory preset for optimal performance.
G3 COMBO BREWERS, OPERATING INSTRUCTIONS 071717A
To Next Page
Loading...
Need help?
General
