24
User manual Curtis G3 Tea/Coffee Combo brewer
Software | Control module
4 Software
• When setting beverages, the same safety
instructions apply as for operating the coffee
machine.
> Follow all “Operation safety instructions”.
4.1 Control modul e
The touchscreen turns on whenever power is provided
to the combo brewer and the rear toggle switch is on.
The symbol buttons on the screen control operation
and programming. Pressing the on-screen symbols
and buttons with your fi nger tip activates the various
functions. The default screen, as well as additional
control buttons are shown below. The confi guration
of the default screen varies depending on the brewer
model.
COFFEE
TEA
4.1.1 Programming mode
With unit OFF, press and hold bottom right BREW
button (4).
Then press and release ON/OFF button. Continue to
hold down BREW button until Enter Code appears.
Enter 4 digit code.
Factory default = 1-2-3-4.
You are now in the programming mode.
CAUTION
Operation safety instructions
page 20
To Next Page
Loading...
