Curtis G3 User Manual

39
User manual Curtis G3 Tea/Coffee Combo brewer
Care | Daily cleaning
Cleaning Pour Pots
 Wash - Wipe the exterior surfaces of the pour pot
and lid with a sponge soaked with the detergent
solution from 15 g special cleaning powder (see
accessories) and 1 L warm water to remove spills
and debris. Fill the liner with the detergent solution.
Use a sponge cleaning brush to clean inside.
 Rinse - Rinse the pour pot and the lid with clean,
warm water.
 Sanitize - Sanitize the interior of the pour pot and
the lid, using a commercial sanitizer suitable for
food grade applications. Swab, brush or pressure
spray the sanitizing solution according to the
directions on the package.
 Air Dry - Turn the pour pot and lid upside down and
allow to air dry.
Note
• The stem on the bottom of TFT series pour
pot lids have a built-in sensor used for the
FreshTrac® feature. Keep this stem free from
coffee oil build-up for proper operation. After
cleaning, inverting the lid for 30 seconds
resets the FreshTrac timer.
NOTE
Follow the accessories chapter,
customer care programm
page 59

Curtis G3 Specifications

General

Brand	Curtis
Model	G3
Category	Brewing Systems
Language	English