5
Safety Precautions
SAVE THESE INSTRUCTIONS.
Proper operation of your Independence bed is necessary to ensure the long life and durability you expect
from a high-quality product. The manufacturer has tested and inspected this product prior to shipment.
scratching your oor.
USER-SERVICEABLE PARTS
This Independence bed is specically designed to have no
maintenance by you, the user. Therefore, you are encouraged not
to open any motors, alter the wiring, or adjust, modify or change the
structure of the product, as it will void the warranty.
FCC compliant device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE: To comply with the FCC RF exposure
compliance requirements, no change to the antenna or the device
is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void
user's authority to operate the device.
CONSUMERS WITH PACEMAKERS
It is possible that the (optional) vibrating feature of this Independence
bed may be misinterpreted by some pacemakers as movement
and/or exercise. This is common with any product that produces
a vibrating motion, and may or may not aect your pacemaker.
Please consult your physician with any concerns.
PRODUCT RATINGS
Lift Motor Restrictions: The lift motors in the Independence bed
are NOT designed to operate continuously for more than three
(3) minutes over a thirty (30) minute time period, or approximately
10% duty cycle. To ensure reliable functionality and full life of this
product, do not attempt to exceed these limits.
NOTE: Attempting to circumvent or exceed this rating will shorten the
life expectancy of the product and may void the warranty.
SMALL CHILDREN AND PETS WARNING
Immediately dispose of all packing materials as it can pose a
smother risk to small children and pets. Injury could occur also if
children or pets are permitted to play on or under the bed. Do not
allow children to operate this bed without adult supervision.
LIFT WARNING
Do not sit on the head or foot sections while in the raised position,
or during lift or lowering cycles.
MOVING AFTER INSTALLATION
Do not place Independence bed vertically on its head or foot sections.
This may cause injury to persons or damage to the Independence
bed. Two people are required for moving this Independence bed
due to its heavy weight.
SAFETY
The input transformer voltage is AC 120V 60HZ; the output voltage
is DC24V 3A. In case of an output short circuit, the power supply
will shut down safely. If this occurs, please contact Customer Care
Center for proper troubleshooting and assistance returning your
base to operational condition.
NOTICE: The changes or modications not expressly approved by
the party responsible for compliance could void the user's authority
to operate the equipment.
When the Independence bed is in Stand position and you are
exiting the bed, keep all linens and pillows away from your feet to
avoid entanglement.
The Independence bed includes several safety features to limit risks
associated with the product. These safety features include a motor
detection feature. When a lift or rotation motor is unplugged or is not
securely connected to the control box or fails to function properly,
the bed will not operate for safety reasons.
When any error detection issue is resolved, the system needs to
undergo a power reset before it can operate normally as a safety
feature. For more information, read the Troubleshooting section of
this manual.
Read the Owner's Manual carefully and completely before operating
the product. Electric shock may occur if electrical components are
not installed or operated according to these guidelines.
To Next Page
Loading...