Need help?Do you have a question about the Cybernet CTS 300A and is the answer not in the manual?
General| Power output | 150W per channel at 8 ohms |
|---|---|
| Total harmonic distortion | <0.05% |
| Type | Amplifier |
| Frequency response | 20Hz - 20kHz |
| Model | CTS-300A |
Guides for connecting loudspeakers, turntables, tuners, auxiliary equipment, tape recorders, and power supply.
Details on connecting left and right channel speakers, wire gauge, and phasing.
Instructions for connecting a turntable, including ground lead and plugs.
Guidance on connecting a tuner using insulated and shielded audio cables.
Steps for connecting external audio devices via AUX input jacks.
Instructions for connecting tape recorders for playback and recording.
Procedure for connecting the amplifier to a power outlet.
Function of the power switch for turning the unit on and off.
Options for selecting speaker outputs (A, B, A+B) or headphones.
Port for connecting stereo headphones for private listening.
Adjusts bass and treble frequencies for tonal balance.
Removes low (rumble) and high (noise) frequencies from audio.
Individually adjusts volume and channel balance.
Boosts low and high frequencies at low listening levels.
Determines stereo or mono reproduction of program sources.
Selects tape output and monitors recording information.
Selects the audio source to be listened to.
Common problems and suggested remedies for amplifier operation.
Detailed technical data including power output, distortion, and frequency response.
Visual guide for connecting all components and speakers, including impedance details.
To Next Page