©2021 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.
1
INTRODUCTION
UNPACKING PROCEDURES
The UPS system is very heavy, please handle with care. Wear safety shoes and use a hydraulic
equipment lift if one is available. At least two people are required for all handling operations,
including unpacking, lifting, and installation in a rack system. Do not use the lifting straps to carry
the unit around; they are provided to manually unpack the unit only.
USE LIFTING STRAPS TO REMOVE UNIT FROM THE BOX.
The CyberPower Step-Down and Isolation Transformers support hardwire and power cord
installations OL5KSTF and are designed for a variety of CyberPower UPS systems. When connected
to a UPS, the step-down transformer converts voltage from 208V down to 120V.
Information, advice, help
To Next Page
Loading...