To Next PageTo Next Page
Need help?Do you have a question about the CyberPower PFC SINEWAVE UPS Series and is the answer not in the manual?
General| Type | Line Interactive |
|---|---|
| Battery Type | Sealed Lead-Acid (SLA) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 0-95% Non-Condensing |
| Model Series | PFC SINEWAVE |
| Output Power Capacity | Varies by model (e.g., 850VA/510W, 1000VA/600W, 1300VA/810W, 1500VA/900W) |
| Input Voltage Range | 90Vac - 140Vac |
| Output Voltage | 120VAC |
| Waveform Type | Sine Wave |
| Frequency | 50/60Hz |
| Number of Outlets | Varies by model (e.g., 8 outlets, 10 outlets) |
| Communication Ports | USB |
| Management Software | PowerPanel Personal/Business |
| Protection | Overload, Short Circuit, Surge |
| Certifications | UL, cUL, FCC |
| Energy Saving Technology | GreenPower UPS design |
Ensure connected equipment does not exceed the UPS unit's rated capacity to prevent overload.
Charge battery for 8 hours. Connect peripherals to battery/surge outlets. Plug UPS into grounded receptacle.
Handle batteries with care, avoid fire, and do not open or mutilate them due to risk of burns.
Step-by-step guide to safely remove and install replacement batteries, followed by charging.
Solutions for tripped circuit breakers due to overload and unexpected short UPS runtime.
Addresses issues with the UPS not turning on and PowerPanel software being inactive.
