Maintenance
Page 5-5
Product Number 8800/8810/8830/8840 Owner’s Manual
3. Inspect bars and handles for wear, paying particular attention to tab area connection points.
Replace all worn handles immediately.
CAUTION: Replace all worn handles immediately. Do not use if less than 1/8” of material remains to the
edge. See Figure 5.
Yearly Procedures
1. Replace all cables at least annually.
4. Inspect snap links for proper latching (indicates wear)
Replace all worn snap links immediately.
5. Inspect for loose or worn grips.
Replace all loose or worn grips immediately.
6. Inspect all labeling for readability. This includes instructional placards, warning and caution decals.
Replace all worn labeling immediately.
7. Inspect all weight stacks for proper alignment and operation.
Correct all improper alignment and operation issues immediately.
8. Wipe Weight Stack Guide Rods clean over entire length. Lubricate with a light coat of medium weight
automotive engine oil.
Figure 5
NOTE: Replace bar if less
than 1/8” of material
remains to the edge.
Attachment Hole
To Next Page
Loading...
Need help?
General
