Safety
Page 1-1
1 - Safety
Important Voltage Information
IMPORTANT: Read all instructions and warnings before using the unit.
Before plugging the power cord into an electrical outlet, verify that the voltage requirements for your
area match the voltage of the unit that you have received. The power requirements for the unit include
a grounded circuit, rated for one of the following: 115 VAC 5%, 50/60 Hz and 15 amps; or 230 VAC
10%, 50/60 HZ and 10 amps. See the voltage requirement decal for the exact voltage requirements of
your unit.
! WARNING: Do not attempt to use this unit with a voltage adapter. Do not attempt to use this
unit with an extension cord.
+
_
+
_
Grounding Instructions
This unit must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
115V Euro Plug
NEMA 5-15 CEE 7/7
! DANGER: Improper connection of the
equipment grounding conductor can result in a
risk of electric shock. Check with a qualified
electrician or service provider if you are in doubt
as to whether the unit is properly grounded. Seek
a qualified electrician to perform any
modifications to the cord or plug. Cybex is not
responsible for injuries or damages as a result of
cord or plug modification.
This unit is for use on a nominal 115 VAC 5%,
50/60 Hz and 15 amps; or 230 VAC 10%, 50/60 Hz
and 10 amps and a grounded circuit. Make sure that
the unit is connected to an outlet having the same
configuration as the plug. Do not use a ground plug
adapter to adapt the power cord to a non-grounded
outlet.
+
_
+
_
Cybex Arc Trainer 610A Owner’s Manual
To Next Page
Loading...
Need help?
General
