CYBEX Arc Trainer 610A - Service Schedule

Cybex Arc Trainer 610A Owner’s Manual
Preventive
Maintenance
Page 4-6
Service Schedule
NOTE: This is the minimum recommended service.
Determine mileage.
1.Enter Test Mode by holding 
 down any key while turning 
 the unit to the on 
 (I) position. 
 2.Then press
First 500 Miles
 ACheck drive belts for tension 
 & wear.
Every 5000 Miles
 ACheck drive belts for tension 
 & wear.
 BMove unit and vacuum 
 underneath.
 CRemove access cover to clean
 inside - use dry cloth & vacuum.
Every 20,000 Miles
DCheck elevation assembly
 & replace worn parts.
 ELubricate elevation bushings.
Service Schedule
All maintenance activities shall be performed by qualified 
personnel. Failure to do so could result in serious injury.
dist
Date Mileage Service Initials