CYBEX Arc Trainer 627AT - Remove and Rotate Handle Assemblies

2. Install the accessory tray bottom to the accessory tray base with three screws using a Phillips
screwdriver.
QtyDescription
1Accessory tray bottom1
1Accessory tray base2
3Screws3
Remove left and right handle assembly
The left and right handle assemblies are shipped in rotated positions. The handle assemblies must be
removed and rotated 180 degrees for proper setup and assembly.
Page 33 of 83
Cybex 626A/626AT, 627A/627AT Arc Trainer Part Number 5626-4 J