18
ADJUSTING THE SHOULDER BELTS
To adjust the height of the shoulder belts (3) please follow
the next steps:
• When the baby is approximately 3 months the seat
insert can be removed to provide enough space for the
child (see page 32).
• The height of the shoulder belts (3) must be adjusted
in such a way that they run through the belt slots (4)
directly above the baby‘s shoulders.
• Take out the shoulder belts (3) from the splitter plate
(17) located ln the rear of the seat.
• Pull both shoulder belts (3) through the shell and seat
cover.
• Thread the shoulder belts (3) through the proper
harness slot (4). From the rear of the seat, secure
the belts onto the splitter plate. Pull to make sure the
shoulder belts are rmly secured onto the splitter plate.
Note! Only if the shoulder belts (3) are adjusted correctly
optimum security can be provided.
Note! Please make sure that the shoulder belts (3) are not
twisted but should lie at against the main seat, run evenly
through the belt slots (4) and down to the buckle (5).
3
5
17
4
To Next Page
Loading...
