1. First, refer to pages 12—15 for Vehicle
Seat Location Requirements.
Select a seat location allowed by your
vehicle manufacturer equipped with
a three point LAP AND SHOULDER
BELT system. Locate the lower LATCH
anchors or the symbols indicating their
location.
2. If the lower LATCH anchors are hidden
behind the crease between the seat
back and seat cushion, install the
supplied LATCH Guides to the lower
LATCH anchors for easier installation of
the booster seat.
To install, connect the two LATCH
Guides to the two lower LATCH anchors
by sliding the LATCH Guides into the
crease and under the lower LATCH
anchor.
a
b
c
17
INSTALLATION USING LATCH
To Next Page
Loading...
