1. Unbuckle the vehicle seat belt and
remove it from the Shoulder Belt Guide.
2. While squeezing the LATCH Adjustment
Handle, pull the booster seat away from
the vehicle seat.
3. Release both LATCH Connectors at
the same time by pressing in (a) while
pulling back (b) on the red release
buttons. Slide the LATCH Connectors
out of the LATCH Guides.
4. Rotate the LATCH Connectors as
shown. While squeezing the LATCH
Adjustment Handle, push the LATCH
Connectors into the booster seat for
storage.
27
a
b
REMOVING THE BOOSTER SEAT AFTER USING LATCH
To Next Page
Loading...
