TO INSTALL WITH SEAT BELT ONLY
1. First, refer to pages 12—15 for
Vehicle Seat Location Requirements.
2.Select a seat location allowed by your
vehicle manufacturer that is equipped
with a THREE POINT LAP AND
SHOULDER BELT system.
3. With the LATCH connectors pushed
in and stored away, simply place the
booster seat on the vehicle seat, making
sure that the Backrest is in full contact
with the vehicle seat back and does not
interfere with by the vehicle’s headrest.
4. Route the shoulder belt behind the
headrest until it rests INSIDE the RED
Shoulder Belt Guide.
NEVER USE the Booster Base
without the Backrest attached.
NEVER USE a locking clip when
installing this booster seat.
The REAR SEAT is the safest
location for a properly installed
booster seat.
20
USING THE BOOSTER SEAT WITH SEAT BELT ONLY
To Next Page
Loading...
