CycleOps Comp 200E User Manual

15
Power Zone 8
9) To reset default zone settings, press
[DOWN ARROW] to scroll to [RESET] and
press [SELECT].
10) To begin a power zone based ride, press
[DOWN ARROW] to scroll to [RETURN] and
press [SELECT]. Press [DOWN ARROW] to
scroll to [RETURN] and press [SELECT] once
again.
SELECT
MODE
POWER ZONE 2
ZONE 5 105%-120%
ZONE 5 120%-133%
ZONE 5 133%-165%
PREVIOUS ZONE
RESET
RETURN
Power Zone 7
8) In Power Zone 2 screen repeat steps 3, 4,
and 5 to set information for [ZONE 5-6].
SELECT
MODE
POWER ZONE 2
ZONE 5 105%-120%
ZONE 5 120%-133%
ZONE 5 133%-165%
PREVIOUS ZONE
RESET
RETURN
Power Zone 6
6) Press [DOWN ARROW] and then press
[SELECT] to adjust [ZONE 2]. Repeat steps
3, 4, and 5 to set [ZONES 2-4]. NOTE: The
lower % training zone will automatically set
to the previous zone's upper limit.
7) Once [ZONE 1-4] information has been
set, press [DOWN ARROW] to scroll to
[NEXT ZONE] and press [SELECT].
SELECT
MODE
POWER ZONE 1
ANAR TH 450
ZONE 1 0%-55%
ZONE 2 55%-75%
ZONE 3 75%-90%
ZONE 4 90%-105%
NEXT ZONE
RETURN

CycleOps Comp 200E Specifications

General

Brand	CycleOps
Model	Comp 200E
Category	Exercise Bike
Language	English