CycleOps PowerTap SL+ User Manual

Cadence (C)
Cadence is measured at the hub by analyzing the way a rider applies torque
through the pedal stroke since there are natural power differences in the pedal
stroke. The rate of pedaling is shown from 40 to 240 RPM.
NOTE: An optional wireless cadence sensor is available to measure cadence at
the crank.
1) Press [MODE] to scroll the cursor to the bottom line of the main display.
2) Press [SELECT] to toggle through the multi-function displays until the "C" ico
n is displayed.
(FIGURE 18)
18
365
25
89
WATTS
3
C
FIGURE 18

CycleOps PowerTap SL+ Specifications

General

Brand	CycleOps
Model	PowerTap SL+
Category	Measuring Instruments
Language	English