Average Cadence (C & AVG)
The average cadence displays data since the last time data was cleared in trip
mode or the selected interval in interval mode. Average cadence is displayed in
RPM.
1) Press [MODE] to scroll the cursor to the bottom line of the main display.
2) Press [SELECT] to toggle through the multi-function displays until the “C” and
“AVG” are displayed. (FIGURE 19)
Energy Expenditure (E)
The total work done over the course of the trip or interval is
shown in kilojoules.
This value is a measure of the total energy expended over the course of your ride.
This is roughly equivalent to dietary calories expended.
1) Press [MODE] to scroll the cursor to the bottom line of the main display.
2) Press [SELECT] to toggle through the multi-function displays until the “E” is dis-
played. (FIGURE 20)
Odometer (O)
Total accumulated distance traveled since the last system reset is displayed in
mile
s or kilometers. To manually input the your odometer reading see COMPUTER
SETUP 1.
1) Press [MODE] to scroll the cursor to the bottom line of the main display.
2) Press [SELECT] to toggle through the multi-function displays until the “O”
is displayed. (FIGURE 21)
19
365
25
76
WATTS
3
C AV
365
25
2009
WATTS
3
E
365
25
2584
WATTS
3
O
FIGURE 19
FIGURE 20
FIGURE 21
To Next Page
Loading...
Need help?
General
