Cycplus M1 User Manual

GPS Location - Quick Start Guide
Press [left button ] to turn on.
Press [left button ] again to start recording.
Get GPS signal after start up takes a few minutes.
Long press [mid button ] to save the recording data.
Long press [left button ] to turn off.
appears to indicate the device is ready.
1
2
3
4
5
To receive satellite signals,
please remains static and make sure your device is used at open space and barrier-free area.
Introduction
NAME: Smart GPS bike computer
MODEL: M1
SCREEN SIZE: 2.9 inch LCD
PRODUCT SIZE: 90*53*20 mm
PRODUCT WEIGHT: 77.5 g
BATTERY: 1200 mAh 3.7 V
MEMORY CAPACITY: 150 hours
ENDURANCE TIME: 30-35 hours
CHARGING MODE: Type-C
CHARGING TIME: Nearly 3.5 hours
APP CONNECTION: Bluetooth 5.0
PERIPHERAL CONNECTION: ANT+
SUPPORTED PERIPHERALS: Speed sensor,
Cadence sensor, Heart rate monitor, Powermeter.
WATERPROOF: IPX6 (Rain-proof, not soakable)
Press the left button
Long press the left button
Press the mid button
Long press the mid button
Press the right button
Long press the right button
Power On
Start/Pause Recording
L
Power Off
L
Count Lap
M
Save Record
M
Go to next page
R
Enter/Quit Settings
R
Heart rate
Cadence
Speed
Clock
Power
Ant+
Recording
GPS
Trip time
Trip dist
No GPS
Temperature
Connected
to phone
Pause recording
Circle
Speed Unit
Altitude
Ascent
Temperature
unit
Gradient
Gradient
Odograph
Heart rate
Cadence
Power
Speed
Heart rate
Cadence
Power
Speed
Gradient
Battery level
Average Data Max Data
Current Data
01
appears when recording starts.
disappears when the recording data has been saved.

Cycplus M1 Specifications

General

Battery Life	30 hours
Waterproof Rating	IPX6
Display	LCD
Charging Time	2 hours
Storage	8 MB
Wireless	Bluetooth
GPS Type	GPS

Summary

Quick Start Guide

Device Power and Recording Operations

Learn how to power the device on/off, start, pause, and save recordings.

GPS Signal and Readiness Indicator

Understand GPS signal acquisition and the device readiness indicator.

Device Introduction and Data Display

Product Specifications

Details on device name, model, size, weight, battery, and memory.

Data Views

Explore current, average, and maximum data displays for cycling metrics.

Device Settings and Configuration

Navigating Settings Menu

Instructions for entering and browsing the device settings.

ANT+ Sensor Connectivity

Steps to connect external ANT+ sensors for enhanced data.

Wheel Circumference Configuration

Set wheel size for accurate distance and speed calculations.

Time Zone and Unit Configuration

Customize time zone, speed units (KMH/MPH), and temperature units (°C/°F).

Factory Reset Procedure

How to perform a factory reset to restore default settings.

App Connectivity and Data Management

Odograph and App Connection

Configure odograph settings and connect to the XOSS app via Bluetooth.

Device and Platform Integration

Pair the M1 computer and sync data with Strava/Training Peaks.

Data Syncing and Analysis

Sync recorded data to the app for analysis and review.

Usage Notes and Maintenance

Recording and Saving Reminders

Key reminders for data recording and saving operations.

Memory Handling and Backlight

Understand memory management and automatic backlight behavior.

Package Contents and Warranty

Included Accessories

List of items included in the package.

Factory Information and Warranty

Details about the manufacturer and warranty policy.

After-Sales Support Contact

Contact information for after-sales service and inquiries.

Tire Circumference Chart

ETRTO Tire Size Reference

Chart correlating ETRTO sizes with circumference in millimeters and inches.