Press the Single-cup (Grind) button “ ” and adjust the coffee-extracting
temperature to be 90℃, the indicator of Program button “ ” flashes, the
indicator of Single-cup (Grind) button “ ” lights solidly, while other indicators
turn off.
Press the Double-cup (Grind) button “ ” and adjust the coffee-extracting
temperature to be 92℃, the indicator of Program button “ ” flashes, the
indicator of Double-cup (Grind) button “ ” lights solidly, while other indica-
a.
b.
III. Customized setting for coffee-extracting temperature
This machine has a PID control function, which can monitor the heating block for
heating water, so that the coffee can be extracted at a temperature of 92°C.
You can adjust the coffee-extracting temperature, and the adjustable temperature
ranges between 90-96°C. 2℃ can be changed each time, which can meet different
taste requirements.
- The bitterness will be increased and the acidity will be decreased when the
temperature temperature is higher.
- The bitterness will be decreased and the acidity will be increased when the
temperature is lower.
heard, then the appliance goes back to the standby mode.
Special notes:
•
•
•
The appliance is equipped with two single-layer filters and two double-layer
filters.
The single-layer filters are applicable for finer coffee powder, and it is recom-
mended that the grinding setting shall range between 0 and 15.
The double-layer filters are applicable for coarser coffee powder, and it is
recommended that the grinding setting shall range between 15 and 30.
To enter the mode for setting the coffee-extracting temperature
Hold and press the Program button “ ” for 3 seconds, the machine will beep and
the indicator of Program button “ ” will start to flash.
- 16 -
To Next Page
Loading...
Need help?
General